SML-T6 Smart Network Cable Tester
For wire mapping of network, telephone, and shielded cables disconnected from switches.
- Switch-free, no-delay wire mapping starts when the main and remote units are connected
- Identifies wire order, opens, shorts, and miswiring in network and telephone cables
- 1-8 and G indicators show wire order and shield continuity
A switch-free, no-delay two-piece smart network cable tester for wire mapping of network, telephone, and shielded network cables, with nominal 60 V PoE burnout protection.
Product Overview
The SML-T6 is a switch-free, no-delay two-piece smart network cable tester for structured cabling, low-voltage maintenance, network maintenance, and security wiring inspection. Wire mapping starts when the cable ends are connected to the main and remote units. The 1-8 and G indicators show wire order, opens, shorts, miswiring, and shield continuity on network and telephone cables.
Typical Applications
- Network wire-order and fault checks in structured cabling projects
- RJ45 network and RJ11 telephone cable troubleshooting
- Conductor and shield continuity checks on shielded network cable
- Cable maintenance in equipment rooms, wiring closets, and security installations
Package Contents
- Main unit / transmitter — 1
- Remote unit / receiver — 1
- 9 V battery — 1
- Product box — 1 set
Use and Safety Limits
For wire mapping, connect the cable ends to the main and remote units. This model provides no test function when connected to a non-PoE or standards-compliant PoE switch. Never connect the remote unit while the cable is connected to a switch.
The tester does not identify the switch category or PoE type. If the category cannot be confirmed, treat it as a non-standard PoE switch and disconnect the switch and its power first. A non-standard PoE switch is covered only by the nominal 60 V burnout protection; test functions are unavailable and their results must not be used. The 60 V value is a nominal protection rating, not a normal operating voltage or PoE-detection capability. Do not connect the tester to mains power, high-voltage wiring, or a circuit of unknown voltage.
Gallery
Features
- Combined RJ45/RJ11 interface with detachable main and remote units
- Powered by one 9 V battery with nominal 60 V PoE burnout protection
Specifications
| Model | SML-T6 |
|---|---|
| Product Category | Smart Network Cable Tester |
| Testable Cables | Twisted-pair, telephone, and shielded network cables (8P / 6P / 4P) |
| Interface | Combined RJ45/RJ11 |
| Test Results | Wire order, open, short, miswire, and shield continuity |
| Display | 1-8 and G LED indicators |
| Operation | Switch-free; plug and test with no start delay |
| PoE Protection | Nominal 60 V burnout protection |
| Power | One 9 V battery |
| Dimensions | 83 × 79 × 22 mm |
| Operating Environment | −10 °C to +60 °C; 10% to 70% RH |
| Material | ABS |
