SML-DSL Multifunction Cable Tracer
For cable tracing, wire mapping, and TDR length tests on de-energized cables with the far end open.
- Integrated cable tracing and 2-to-8-conductor remote wire mapping
- Measures PoE output voltage and identifies standard or non-standard power
- TDR length testing with 0.1 m resolution and a 500 m maximum range
Multifunction field tracer with network-cable tracing and mapping, PoE checks, and 0.1 m-resolution TDR length testing.
Product Overview
The SML-DSL adds TDR length testing to network-cable tracing, remote wire mapping, and PoE checks. It reports twisted-pair length by pair for structured-cabling acceptance and fault diagnosis. The unit also traces telephone lines, two-core wires, and BNC coaxial cable, while the receiver’s color display consolidates wire map, length, signal strength, and test status.
The product image shows the general series appearance. The panel and interfaces vary by model; refer to the corresponding unit.
Typical Applications
- Locating target network cables at patch panels, switch ports, and wiring closets
- Diagnosing wire order, continuity, open, short, and crossover faults
- Checking PoE port voltage and power type
- Measuring network-cable and pair length
- Tracing telephone lines, two-core wires, and coaxial cable
Packing and Accessories
This model includes one transmitter, one receiver, one two-core receiver head, one network-cable receiver head, one two-core alligator clip/RJ11 alligator adapter lead, one USB charging cable, one certificate, one warranty card, one manual, one work bag, and one color box.
Use and Safety Limits
Connect a PoE cable only to the shared PoE/IP/network test port; the maximum permitted test voltage is 60 V. Never connect a PoE-powered cable to the length-test port or any other port. For length testing, the cable must be de-energized and its far end left open. The coaxial port is for tracing only, not length or continuity testing. This model does not support tracing 220 V in-wall or underground cables. Never connect it to mains power or an unknown high-voltage circuit.
Gallery
Features
- Traces telephone lines, two-core wires, and BNC coaxial cable
- 2.4-inch color receiver display with Chinese and English interfaces
- Auto power-off and backlight time settings
Specifications
| Model | SML-DSL |
|---|---|
| Product Category | Multifunction Cable Tracer |
| Displays | 2.4-inch color LCD on receiver; LED indicator on transmitter |
| Network Interface | RJ45 |
| PoE Test | Up to 60 V; standard/non-standard identification |
| Length Test | TDR; 0.1 m resolution; 500 m maximum |
| Tracing Distance | Network cable up to 500 m; coaxial cable 300 m |
| In-Wall/Underground Tracing | Not supported |
| Transmitter Power | 3.7 V / 1200 mAh |
| Receiver Power | 7.4 V / 1000 mAh |
| Charging Port | USB Type-C |
| Settings | Chinese/English language selection; auto power-off 30 min / 60 min / never; backlight 5 min / 10 min / never |
| Packing List | Transmitter, receiver, two-core receiver head, network-cable receiver head, two-core alligator clip/RJ11 alligator adapter lead, USB charging cable, certificate, warranty card, manual, work bag, and color box, 1 each |
| Operating Environment | -10°C to +60°C; 10% to 70% RH |
