SML-DSLA-IP+ Professional IP Network Multifunction Cable Tracer

Professional IP tester with all nine network functions, 0.01 m-resolution TDR length testing, PoE checks, and energized-cable tracing.

Product Overview

The SML-DSLA-IP+ combines all nine professional IP/network functions, 0.01 m-resolution TDR length testing, and concealed-circuit tracing at 220 V or below. It also covers network-cable tracing and mapping, PoE checks, and multi-cable tracing for technicians handling cabling, network, and line-location work at the same site.

The product image shows the general series appearance. The panel and interfaces vary by model; refer to the corresponding unit.

IP / IP+ Feature Editions

Network function	IP entry edition	IP+ professional edition
IP scan	Supported	Supported
PING	Supported	Supported
Port blink	Supported	Supported
Link speed	Supported	Supported
IP monitoring	—	Supported
HTTP test	—	Supported
LLDP	—	Supported
Network sniffing	—	Supported
Broadcast monitoring	—	Supported

IP configuration is a shared setup function used by both editions and is not counted as a separate feature tier. Choose the SML-DSLA-IP when only the four entry network functions are required.

Typical Applications

Locating network cables and checking wire map, continuity, and TDR length
Checking PoE port voltage and power type
Inspecting IPv4 reachability, addresses, links, neighboring devices, and broadcast conditions
Tracing telephone lines, two-core wires, and coaxial cable
Locating the route of in-wall and underground circuits at 220 V or below

Use and Safety Limits

For length testing, the cable must be de-energized and its far end left open. Energized-cable tracing requires the specified accessories and is limited to circuits at 220 V or below; never connect the tester to a 380 V circuit. Actual depth varies with wall construction, burial depth, and site interference. The maximum permitted PoE test voltage is 60 V. Use IP scan, HTTP, network sniffing, and broadcast monitoring only on networks where you have authorization. LLDP results depend on peer-device support and configuration.

Features

Integrated cable tracing and 2-to-8-conductor remote wire mapping
TDR length testing with 0.01 m resolution and a 500 m maximum range
Traces in-wall and underground cables energized at 220 V or below
IP scan, PING, port blink, and link speed
IP monitoring, HTTP test, LLDP, network sniffing, and broadcast monitoring

Specifications

Model	SML-DSLA-IP+
Product Category	Professional IP Network Multifunction Cable Tracer
Network Feature Edition	Professional Edition (IP+)
Displays	2.4-inch color LCD on receiver; LED indicator on transmitter
PoE Test	Up to 60 V; standard/non-standard identification
Length Test	TDR; 0.01 m resolution; 500 m maximum
Energized-Cable Tracing	220 V or below; 50 cm in-wall, 150 cm underground
IP Tests	PING, IP scan, IP monitoring, and HTTP test; IP configuration is a shared setup function
PING	IPv4 / ICMP Echo; 1 ms round-trip-time display resolution; up to 1,000 requests
IP Scan	IPv4 / ARP; up to 254 addresses per scan within the same broadcast domain
HTTP Test	Starts a temporary local web service accessible from the same subnet
Network Tests	Port blink, link speed, LLDP, network sniffing, and broadcast monitoring
Link Speed	10 / 100 / 1000 Mbps; full or half duplex
LLDP	The peer device must support and enable LLDP
Broadcast Threshold	500-2,000 pps
Tracing Distance	Network cable up to 500 m; coaxial cable 300 m
Power	3.7 V / 1200 mAh transmitter; 7.4 V / 1000 mAh receiver
Operating Environment	-10°C to +60°C; 10% to 70% RH

Download

SML-DS Series Multifunction Cable Tracer User Manual