SML-DSLA-IP Entry IP Network Multifunction Cable Tracer
Entry IP tester and cable tracer with port tests, PoE checks, 0.01 m-resolution TDR length testing, and energized-cable tracing.
Product Overview
The SML-DSLA-IP combines the four entry network functions with 0.01 m-resolution TDR length testing and concealed-circuit tracing at 220 V or below. It provides IP scan, PING, port blink, and link speed together with network-cable tracing and mapping, PoE checks, and multi-cable tracing.
The product image shows the general series appearance. The panel and interfaces vary by model; refer to the corresponding unit.
IP / IP+ Feature Editions
| Network function | IP entry edition | IP+ professional edition |
|---|---|---|
| IP scan | Supported | Supported |
| PING | Supported | Supported |
| Port blink | Supported | Supported |
| Link speed | Supported | Supported |
| IP monitoring | — | Supported |
| HTTP test | — | Supported |
| LLDP | — | Supported |
| Network sniffing | — | Supported |
| Broadcast monitoring | — | Supported |
IP configuration is a shared setup function used by both editions and is not counted as a separate feature tier. Choose the SML-DSLA-IP+ when the five professional diagnostics are required.
Typical Applications
- Locating network cables and checking wire map, continuity, and TDR length
- Checking PoE port voltage and power type
- Inspecting IPv4 reachability, same-domain addresses, switch ports, and link speed
- Tracing telephone lines, two-core wires, and coaxial cable
- Locating the route of in-wall and underground circuits at 220 V or below
Use and Safety Limits
For length testing, the cable must be de-energized and its far end left open. Energized-cable tracing requires the specified accessories and is limited to circuits at 220 V or below; never connect the tester to a 380 V circuit. Actual depth varies with wall construction, burial depth, and site interference. The maximum permitted PoE test voltage is 60 V. Use IP scan, PING, and port tests only on networks where you have authorization.
Features
- Integrated cable tracing and 2-to-8-conductor remote wire mapping
- TDR length testing with 0.01 m resolution and a 500 m maximum range
- Traces in-wall and underground cables energized at 220 V or below
- Entry edition with IP scan, PING, port blink, and link speed
Specifications
| Model | SML-DSLA-IP |
|---|---|
| Product Category | Entry IP Network Multifunction Cable Tracer |
| Network Feature Edition | Entry Edition (IP) |
| Displays | 2.4-inch color LCD on receiver; LED indicator on transmitter |
| PoE Test | Up to 60 V; standard/non-standard identification |
| Length Test | TDR; 0.01 m resolution; 500 m maximum |
| Energized-Cable Tracing | 220 V or below; 50 cm in-wall, 150 cm underground |
| IP Tests | PING and IP scan; IP configuration is a shared setup function |
| PING | IPv4 / ICMP Echo; 1 ms round-trip-time display resolution; up to 1,000 requests |
| IP Scan | IPv4 / ARP; up to 254 addresses per scan within the same broadcast domain |
| Network Tests | Port blink and link speed |
| Link Speed | 10 / 100 / 1000 Mbps; full or half duplex |
| Tracing Distance | Network cable up to 500 m; coaxial cable 300 m |
| Power | 3.7 V / 1200 mAh transmitter; 7.4 V / 1000 mAh receiver |
| Operating Environment | -10°C to +60°C; 10% to 70% RH |
Download
Related Products
SML-DS Multifunction Cable Tracer
Portable field tracer combining network-cable tracing, remote wire mapping, PoE checks, and two-core and coaxial cable tracing.
SML-DSL Multifunction Cable Tracer
Multifunction field tracer with network-cable tracing and mapping, PoE checks, and 0.1 m-resolution TDR length testing.
SML-DSA Multifunction Cable Tracer
Field tracer combining network-cable tracing and mapping, PoE checks, and in-wall and underground tracing for circuits at 220 V or below.
SML-DSLA Multifunction Cable Tracer
Multifunction field tracer combining cable tracing and mapping, PoE checks, 0.01 m-resolution TDR length testing, and energized-cable tracing.
SML-DSLA-N Enhanced Multifunction Cable Tracer
Enhanced tracer combining cable tracing and mapping, PoE checks, 0.01 m-resolution TDR length testing, and deeper energized-cable tracing.
SML-DS-IP Entry IP Network Multifunction Cable Tracer
Cable tracer with remote wire mapping and PoE checks plus the entry-level IP scan, PING, port blink, and link-speed functions.
SML-DS-IP+ Professional IP Network Multifunction Cable Tracer
Cable tracer with wire mapping, PoE checks, the four entry network functions, and five professional IP/network diagnostics.
SML-DSL-IP Entry IP Network Multifunction Cable Tracer
Cable tracer with PoE checks, 0.1 m-resolution TDR length testing, IP scan, PING, port blink, and link speed.
SML-DSL-IP+ Professional IP Network Multifunction Cable Tracer
Cable tracer with 0.1 m-resolution TDR length testing, PoE checks, and all nine professional IP/network functions.
SML-DSA-IP Entry IP Network Multifunction Cable Tracer
Entry IP tester and cable tracer with IP scan, PING, port tests, PoE checks, and concealed-circuit tracing at 220 V or below.
SML-DSA-IP+ Professional IP Network Multifunction Cable Tracer
Professional IP tester and cable tracer with all nine network functions, PoE checks, and concealed-circuit tracing at 220 V or below.
SML-DSLA-IP+ Professional IP Network Multifunction Cable Tracer
Professional IP tester with all nine network functions, 0.01 m-resolution TDR length testing, PoE checks, and energized-cable tracing.